Shift Boot Retainer

 Image URL Text

STEP 1

Remove the standard shifter, shift boot and trim. Remove any existing shift boot retainers from the shift boot if applicable to your vehicle.

STEP 2

Flip the shift boot inside out. Insert the Shift Boot Retainer upside down from the bottom side of the shift boot. Push the Shift Boot Retainer through the shift boot until it is just below the opening of the shift boot.

STEP 3

Secure the shift boot to the Shift Boot Retainer using the provided zip-tie. The zip-tie should be installed on the outside of the shift boot and around the lower collar of the Shift Boot Retainer. Once the zip-tie is tight, trim the excess tag.

STEP 4

Flip the shift boot back over the Shift Boot Retainer. Re-attach the shift boot and trim to the vehicle while sliding the Shift Boot Retainer over the shifter assembly.

STEP 5

Install the adapter and shifter/extension. To see our adapter guides, click here.

STEP 6

Once the shifter/extension is installed, clip the Shift Boot Retainer into the base of the shifter/extension. Apply pressure until you feel the Shift Boot Retainer click into place. Enjoy!